|
Line Break Horizontal |
  
|
|
Line Break Horizontal |
|
Summary:
Breaks a horizontal line
Description:
This command will break a horizontal line with a user-specified gap, multiplied by the scale factor of the drawing, leaving the vertical line unchanged. The gap will re-scale itself depending upon the drawing scale. Typically used for single line crosses in Electrical or Piping drawings. This command can only be used for lines or polylines drawn orthogonally.
Command: LBH
Enter break gap [2/2.5/3] <2.5>: Enter gap
Pick intersection of lines: Pick point
Direct link to this topic:
© 2011 Arup