Navigation:  Best Practices & FAQ's > FAQs >

CADtools Ustn Enabling Debugging

Previous pageReturn to chapter overviewNext page

From CADtools 2.1 for Microstation and onwards, CADtools can print debugging messages to the Message centre. CADtools_Ustn_Debug_1

To enable debugging, follow these steps

 

1. Right-click the Message Centre area and select 'Properties'

CADtools_Ustn_Debug_2

 

2. Tick the 'Display Debug message' check box

CADtools_Ustn_Debug_3

 

3. Debug messages will then appear with a small 'cog' symbol, and CADtools debug messages will be prepended with 'CADtools:'

CADtools_Ustn_Debug_4

 

 

 


Direct link to this topic:

© 2013 Arup