How can I batch process my files to change something?
See the CADtools Ustn Batch Process page
I have trouble with DWG's referencing at the wrong scale.
See the CADtools Ustn Working with DWGs page
The Insert Issue cell is 1000x too big!.
See CADtools Ustn Working with DWGs#TroubleShooting
I need to take a laptop and work out of the office
See CADtools Ustn Working offline
What do all these config variables mean
Refer to the following pages depending on your version:
•CADtools Ustn v8.5 (V8 2004) config vars
•CADtools Ustn v8.9 (XM) config vars
I need to update the project drawing borders to use the tags defined by the client
See CADtools Ustn Updating existing drawings to client titleblocks
How do I install NavisWorks for v8 2004 and v8 XM?
Refer to the CADtools Ustn and Navisworks page
How do I work with GenerativeComponents?
Refer to the CADtools_Ustn_GenerativeComponents page
MicroStation XM Installation instructions for XP 64-bit
All installers for the latest CADtools supported Bentley Products have been updated to be 64bit compatible and are located in P:\Program Files\Oasys\CADtools_USTN\Local\Install
If the installers don't work you can follow the procedure below.
According to Bentley's Tech Spec's only Bentley XM products are certified to work on XP 64-bit or Vista. Currently, in order to get MicroStation working the install process needs to be done manually by following these steps:
•Install P:\Program Files\Oasys\CADtools_Ustn\Apps\Microstation_XM\Install\Pre-Reqs\msspp08090401en\Setup Prerequisites 08.09.04.01_en.exe
•Install P:\Program Files\Oasys\CADtools_Ustn\Apps\Microstation_XM\Program\MicroStation_08.09.04.88\MicroStation.msi
Note: Ensure program default installation folder is reset to C:\Program Files\Bentley_XM
Note: Ensure workspace default installation folder is reset to C:\Documents and Settings\All Users\Application Data\Bentley_XM\WorkSpace
•Copy P:\Program Files\Oasys\CADtools_Ustn\V8.9\Install\CADtools_Ustn\*.* to C:\CADtools_Ustn\*.*
Note: Ensure access is read / write to ALL
•Copy P:\Program Files\Oasys\CADtools_Ustn\V8.9\Install\CADtools_PC.cfg to C:\Documents and Settings\All Users\Application Data\Bentley_XM\WorkSpace\Standards\CADtools_PC.cfg
•Rename C:\Documents and Settings\All Users\Application Data\Bentley_XM\WorkSpace\Standards\standards.cfg to standards.txt
•Create desk top icon by copying P\Program Files\Oasys\CADtools_Ustn\V8.9\Install\Desktop\CADtools Ustn.lnk to C:\Documents and Settings\All Users\Desktop\CADtools XM.lnk
Direct link to this topic:
© 2013 Arup